Skip to content
ProAc Preowned

ProAc Response D2D - Oak Standmount Speaker Pair

£1,990.00 £3,850.00 Save £1,860
Audio Emotion

Condition Report

Score: 5 / 5 Mint

Visually and mechanically indistinguishable from new.

Condition Notes:
  • No Stands.
Origin Preowned
Original Box ✓ Yes
Packaging ✓ Yes
Known History:
  • Bought new in 2026.
Included Accessories:
  • ✓ Includes Manual
  • ✓ Includes Grilles
Product Details

Product Overview & Specifications

From ProAc:

ProAc Response D2D Standmount Speakers

The ProAc Response D2D is a premium two-way standmount loudspeaker designed and handcrafted at ProAc’s factory in Brackley, England.

It combines a 165mm glass-fibre bass/midrange driver, copper phase plug, 25mm silk-dome tweeter and a front-facing reflex port within a rigid and carefully damped cabinet.

The result is a compact monitor with a quoted frequency response of 30Hz to 30kHz, a spacious soundstage and precise stereo imaging.

A Long-Established Response Monitor

The Response D2 forms part of a long line of compact ProAc monitors developed to provide high-end performance without the visual impact of a large floorstanding loudspeaker.

Its cabinet may appear conventional, but the materials, internal damping, driver selection and crossover have been developed as a complete system.

165mm Glass-Fibre Bass/Midrange Driver

The Response D2D uses a 165mm ProAc bass/midrange driver with an Excel magnet system.

Its glass-fibre weave cone is designed to combine low mass with the rigidity required for controlled movement across the bass and midrange frequencies.

The driver provides the scale and low-frequency extension required to give the D2D a considerably larger presentation than its standmount dimensions might suggest.

Copper Phase Plug

A solid copper phase plug is positioned at the centre of the bass/midrange driver.

The phase plug helps manage the behaviour of sound generated around the centre of the cone while also assisting with heat dissipation from the voice-coil assembly.

Its distinctive copper finish has become one of the most recognisable visual details of the Response D2.

25mm Silk-Dome Tweeter

The D2D uses ProAc’s 25mm silk-dome tweeter with air cooling and internal damping.

The tweeter is designed to reproduce fine high-frequency detail while retaining the smooth and naturally balanced character associated with ProAc’s dome-equipped models.

It is offset from the centre of the front baffle, with the left and right speakers arranged as a mirror-image pair.

Mirror-Image Tweeter Layout

The tweeters are positioned on opposite sides of the two cabinets rather than being placed centrally.

The speakers should be positioned as a symmetrical pair. The preferred inward or outward tweeter orientation can depend on the room, listening distance and amount of toe-in, so both arrangements are worth comparing during setup.

Front-Facing Reflex Port

A reflex port on the front baffle reinforces the speaker’s low-frequency output.

The forward-facing design makes the D2D less dependent on a large gap behind the cabinet than many rear-ported speakers, but it should not be assumed that the speaker can be placed directly against a wall without affecting the bass.

Room dimensions, stand height and distance from nearby boundaries will all influence the final tonal balance.

30Hz to 30kHz Frequency Response

ProAc quotes a frequency response of 30Hz to 30kHz.

This is unusually deep extension for a standmount loudspeaker of this size and allows the D2D to reproduce substantial bass without automatically requiring a subwoofer.

The usable bass response in a particular system will still depend on room reinforcement, speaker placement, listening level and the amplifier’s control.

Hand-Built Crossover

The crossover uses selected components mounted on a dedicated circuit board.

It divides the incoming signal between the bass/midrange driver and tweeter while maintaining a coherent transition through the crossover region.

Multistrand oxygen-free copper cable is used for the internal wiring throughout the loudspeaker.

Bi-Wiring and Bi-Amplification

The crossover is divided to support optional bi-wiring and bi-amplification.

For normal single-wire operation, the high-frequency and low-frequency inputs must remain connected by the supplied terminal links.

Bi-amplification should only be undertaken with suitable equipment and a clear understanding of the amplifier and speaker connections.

88.5dB Sensitivity

The Response D2D has a quoted sensitivity of 88.5dB for one watt measured at one metre.

This is reasonably efficient for a high-performance standmount speaker and allows it to work with a broad selection of sensibly chosen amplifiers.

The amplifier must still provide sufficient quality, control and dynamic headroom for the room size and required listening level.

8-Ohm Nominal Impedance

The nominal impedance is specified at 8 ohms.

This makes the D2D a relatively accommodating electrical load compared with many lower-impedance loudspeakers.

Amplifier compatibility should nevertheless be assessed using the complete system rather than the nominal impedance figure alone.

20W to 150W Recommended Amplification

ProAc recommends amplifiers rated between 20W and 150W per channel.

This range should not be treated as a guarantee that every amplifier within it will produce the same result.

Power-supply quality, current delivery, distortion behaviour, room size and listening habits are all important when choosing an amplifier.

Designed for Rigid High-Mass Stands

ProAc specifies stand mounting on rigid, high-mass supports.

A suitable stand should hold the speakers securely, resist movement and position the tweeters close to seated ear height.

The interface between the cabinet and stand should be stable, while the stand itself should be correctly levelled and coupled or isolated according to the floor construction.

Positioning the Response D2D

  • Use rigid stands of an appropriate height
  • Begin with the speakers clear of rear and side walls
  • Keep the left and right speakers the same distance from the listening position
  • Arrange the offset tweeters as a symmetrical mirror-image pair
  • Experiment with inward and outward tweeter orientation
  • Adjust toe-in to balance image focus and soundstage width
  • Avoid placing one speaker significantly closer to a corner
  • Make small positioning changes and listen between adjustments

Toe-In and Stereo Imaging

The correct amount of toe-in depends on the room, listening distance and high-frequency balance of the system.

Aiming the speakers more directly towards the listening position can sharpen image focus and centre-stage definition.

Reducing the toe-in may produce a wider soundstage and a slightly more relaxed tonal balance.

Substantial Cabinet Construction

The D2D cabinet measures approximately 430mm high, 203mm wide and 260mm deep, including the 12mm grille thickness.

Its enclosure is designed to provide a rigid and well-damped foundation for the drive units while controlling unwanted cabinet resonance.

The relatively narrow front baffle also helps the speaker create a focused stereo image without visually dominating the room.

Handcrafted in England

ProAc loudspeakers are handcrafted at the company’s factory in Brackley, England.

Individual technicians are responsible for building and testing the loudspeakers to ensure that each pair meets ProAc’s production standards.

The cabinet construction, driver assembly, crossover and finish are all brought together as part of the same manufacturing process.

Real-Wood Veneers and Painted Finishes

The Response D2D is available in Black Ash, Mahogany, Cherry, Walnut, Natural Oak and Silk White as standard finishes.

Liquidambar, Rosewood and Ebony are premium finishes available to order at additional cost.

Finish availability, pricing and lead times should be confirmed when ordering.

Acoustically Transparent Grilles

Acoustically transparent crimplene grilles are provided to protect the drive units.

Magnetic grilles are available with certain finishes.

The exact grille attachment and finish should be confirmed for the selected cabinet option.

Key Features

  • Premium two-way standmount loudspeakers
  • Supplied as a stereo pair
  • Designed and handcrafted in England
  • 165mm ProAc bass/midrange driver
  • Excel magnet system
  • Glass-fibre weave cone
  • Solid copper phase plug
  • 25mm ProAc silk-dome tweeter
  • Air-cooled tweeter design
  • Internally damped tweeter
  • Mirror-image offset tweeter layout
  • Front-facing reflex port
  • 30Hz to 30kHz frequency response
  • 88.5dB sensitivity
  • 8-ohm nominal impedance
  • 20W to 150W recommended amplification
  • Hand-built crossover
  • Selected crossover components
  • Dedicated crossover circuit board
  • Multistrand oxygen-free internal cable
  • Optional bi-wiring
  • Optional bi-amplification
  • Rigid high-mass stand mounting recommended
  • Acoustically transparent crimplene grilles
  • Magnetic grilles with selected finishes
  • Standard and premium cabinet finishes
  • 430mm-high cabinet
  • Approximately 11kg per speaker

 

Core Specification

  • Product type: Passive two-way standmount loudspeakers
  • Model: ProAc Response D2D
  • Previous product name: ProAc Response D Two
  • Number supplied: 1 stereo pair
  • Speaker configuration: Two-way, two-driver bass-reflex design
  • Reflex port position: Front facing
  • Internal amplification: Not provided
  • Manufacture: Handcrafted and tested in Brackley, England

Acoustic Performance

  • Frequency response: 30Hz to 30kHz
  • Sensitivity: 88.5dB for 1W at 1 metre
  • Nominal impedance: 8 ohms
  • Recommended amplifier power: 20W to 150W per channel

Bass and Midrange Driver

  • Number of bass/midrange drivers: 1 per speaker
  • Driver diameter: 165mm or 6.5 inches
  • Driver manufacturer: ProAc
  • Magnet system: Excel magnet system
  • Cone material: Glass-fibre weave
  • Phase plug: Solid copper

Tweeter

  • Number of tweeters: 1 per speaker
  • Tweeter diameter: 25mm or 1 inch
  • Tweeter type: ProAc silk dome
  • Cooling: Air cooled
  • Internal damping: Provided
  • Baffle position: Mirror-image offset
  • Ribbon tweeter: Not fitted to the D2D

Crossover and Internal Wiring

  • Crossover construction: Selected components on a dedicated circuit board
  • Internal cable: Multistrand oxygen-free copper
  • Split crossover inputs: Provided
  • Single-wiring: Supported with terminal links fitted
  • Bi-wiring: Supported
  • Bi-amplification: Supported

Connections

  • Connection type: Split loudspeaker binding posts
  • Speaker-level input: Required from a suitable stereo amplifier
  • Wireless connection: Not provided
  • Bluetooth: Not provided
  • Network streaming: Not provided

Installation

  • Installation mode: Stand mounted
  • Recommended stand type: Rigid, high-mass loudspeaker stands
  • Stand inclusion: Not included
  • Recommended tweeter height: Close to seated ear level
  • Speaker orientation: Symmetrical mirror-image pair
  • Toe-in: Adjustable according to room and listening position

Cabinet and Grille

  • Cabinet type: Rigid and internally damped enclosure
  • Reflex loading: Front-facing port
  • Grille: Acoustically transparent crimplene
  • Grille thickness: Approximately 12mm
  • Magnetic grilles: Available with certain finishes

Dimensions and Weight

  • Height: 430mm
  • Width: 203mm
  • Depth: 260mm including 12mm grille thickness
  • Net weight: Approximately 11kg per speaker
  • Approximate pair weight: 22kg excluding packaging

System Requirements

  • Amplifier: Suitable stereo amplifier required
  • Recommended amplifier output: 20W to 150W per channel
  • Speaker cables: Required separately
  • Speaker stands: Required separately
  • Source equipment: Required separately
  • Subwoofer: Optional

 

Customer Feedback

Customer Reviews

Price Match Request

Seen the ProAc Response D2D - Oak Standmount Speaker Pair cheaper elsewhere? Let us know and we'll aim to match or beat it.

ProAc Response D2D - Oak Standmount Speaker Pair

ProAc Response D2D - Oak Standmount Speaker Pair

Wishlist