Octave MRE 130 Mono Power Amplifiers (Pair)
Octave MRE 130 Mono Power Amplifiers (Pair)
Our price match promise...
If you find an identical item cheaper from one of our online competitors, tell us and not only will we match the price, we'll beat it by 10% of the difference.
Estimated Shipping Widget will be displayed here!
Ruler of the Sound
The MRE 130 mono amplifiers are push-pull power amps in pentode configuration, producing approximately 140W per channel at 2% THD. The MRE 130 monos are designed to reproduce the vast scale of a large orchestra in its entirety. From the deepest bass, to the highest note- all the musical information is conveyed without loss of dynamic details. Raw emotion, stunning detail and rich voices - the MRE delivers fireworks. There are power amps on the market which cant run because of the power they have, whereas the MRE 130 can sprint. The sum of all its sonic characteristics makes the MRE 130 a suitable partner even for the exalted Jubilee preamp.
OCTAVE power amplifiers have always set new standards. With the introduction of the original RE 280 stereo power amplifier, Andreas Hofmann left traditional power amp technologies far behind. With the MRE 130, Hofmann has gone one step further. While it has the same power management and optimized input stage as its stereo brother, the MRE 130 benefits from an innovative and enhanced output stage configuration. What is revolutionary about this new generation of amplifiers is that OCTAVE has employed the classic, yet almost forgotten, pentode configuration.
The classic pentode configuration was quite commonly used in earlier power amplifiers. It offered the benefits of reliability and a relatively high power output. From a modern perspective, its disadvantage was reduced dynamic stability and a high level of distortion. These effects are not a direct result of the pentode itself, but rather of the circuitry employed at the time. Andreas Hofmann has now developed a new circuit design that eliminates the drawbacks of the classic pentode configuration. This novel design involves the use of a second, separate power supply circuit for the auxiliary current required for the pentode mode of operation. The characteristics of this enhanced pentode circuit employed in the MRE 130 are virtually ideal from both a sound quality and an engineering point of view.
Technical Data
| Power Output | 130 Watt into 4 Ohm |
| Frequency Response | 10 Hz - 80 kHz / ± 0,5 dB |
| Total Harmonic Distortion | < 0,1% at 10 Watt into 4 Ohm |
| Signal-to-Noise Ratio | > 100 dB |
| Minimum Speaker Impedance | 2 Ohm |
| Gain / Input Sensitivity | + 30 dB / 1 V |
| Connections | 1 x RCA 1 x XLR Input |
| Features | Bias Adjustment, Power Management |
| Power Consumption | 160 Watt idle, 320 Watt at full power |
| Standard Accessory: | Power cord, 3 mm Screwdriverr for BIAS Adjustment, 1 sparetube KT88/6550 |
| Weight | 22,7 kg each Amplifier |
Manufacturer site
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
