Click to Enlarge
Product Details
Product Overview & Specifications
The all new K-Series marks the beginning of a new era for Epos. Designed by Luke Creek, the K2 floor-standing loudspeaker is the largest model in this new range.
The K series features an unusual front firing slot port, rear mounted drivers and painted cabinet finishes. The K-Series is not only sleek and stylish, it also has a clever trick hidden up its sleeve.
Out of the box the K-Series is a stylish and sonically impressive passive loudspeaker, built to a very high standard. Now for the trick; designed into the K-Series is a latent upgrade path that allows it to be converted from a passive to a sophisticated ‘active digital’ product, using an optional Active-K module. Active-K allows the K2 to be at the heart of a 21st century ‘Hi-Resolution’ audio system.
The K-Series is much more than just another box loudspeaker, it paves the way to the future of Hi-Fi!
The all new K-Series painted MDF cabinet design includes some very clever internal bracing to minimise cabinet coloration. The K-Series sees the introduction of new reflex front firing slot port technology, designed for two special reasons.
Firstly, it allows high volumes of air to pass without any nasty audible chuffing noises, unlike most conventional round tube ports. Secondly, the slot port has enabled Epos to improve the low frequency performance from such a relatively small driver area.
One of the key design factors included in the K-Series is the ability to convert to an ‘active digital’ speaker. The rear panel and passive crossover are designed to be removed and replaced with the Active-K module. Coming late 2014!
The K-Series is available in two elegant finishes: silk White or Black. Both finish options offer a wonderfully luxurious look and feel to these loudspeakers. For those times when the attractive front needs to be protected or hidden, an optional magnetic grille can be easily fitted. Just place it close to the front and it will automatically snap-into place, protecting the delicate drivers from little fingers or paws.
The K series features an unusual front firing slot port, rear mounted drivers and painted cabinet finishes. The K-Series is not only sleek and stylish, it also has a clever trick hidden up its sleeve.
Out of the box the K-Series is a stylish and sonically impressive passive loudspeaker, built to a very high standard. Now for the trick; designed into the K-Series is a latent upgrade path that allows it to be converted from a passive to a sophisticated ‘active digital’ product, using an optional Active-K module. Active-K allows the K2 to be at the heart of a 21st century ‘Hi-Resolution’ audio system.
The K-Series is much more than just another box loudspeaker, it paves the way to the future of Hi-Fi!
The all new K-Series painted MDF cabinet design includes some very clever internal bracing to minimise cabinet coloration. The K-Series sees the introduction of new reflex front firing slot port technology, designed for two special reasons.
Firstly, it allows high volumes of air to pass without any nasty audible chuffing noises, unlike most conventional round tube ports. Secondly, the slot port has enabled Epos to improve the low frequency performance from such a relatively small driver area.
One of the key design factors included in the K-Series is the ability to convert to an ‘active digital’ speaker. The rear panel and passive crossover are designed to be removed and replaced with the Active-K module. Coming late 2014!
The K-Series is available in two elegant finishes: silk White or Black. Both finish options offer a wonderfully luxurious look and feel to these loudspeakers. For those times when the attractive front needs to be protected or hidden, an optional magnetic grille can be easily fitted. Just place it close to the front and it will automatically snap-into place, protecting the delicate drivers from little fingers or paws.
Specifications
| Power Handling | 150 Watts unclipped speech and music |
| Frequency Range | 41Hz – 30KHz |
| Impedance | 4 Ohm |
| Sensitivity | 90dB - 2.83V@1m |
| Tweeter | 25mm soft dome, 25mm high-temperature voice coil in a reservoir of Ferro-fluid and driven by a high quality neodymium magnet system. |
| Bass/Midrange | x2 150mm (300mm) of piston area made from a polypropylene cone with a 25mm high-temperature voice coil and large magnet system. |
| Crossover | Tweeter = 1st order crossover feeds the tweeter and comprises of a 2.2uF high quality Polypropylene capacitor and metal oxide resistor.Mid/Bass = 2nd order low-pass filter, featuring a large iron-core inductor and high quality Polypropylene capacitor.The K2’s crossover can be configured in either single or bi-wire configuration, via large 4mm terminal posts. |
| Internal Wiring | 18 AWG oxygen free copper stranded cable |
| Grille | Optional snap on Grille can be added. |
| Size | 875x185x250mm / 34.44×7.28×9.8 inches |
| Weight | 11kg / 24.25lb per speaker (unpacked) 12kg / 26.45lb packed single speaker |
Customer Feedback
Customer Reviews
Don't let the hassle of selling privately hold you back. We accept almost any trade-in (of lower value) to make your upgrade affordable. We even handle the logistics with our seamless courier service.
How it works:
The Offer: If you are happy with our quote, simply contact us to complete your purchase.
The Collection & Delivery: We will contact you to arrange the collection of your old equipment and delivery of your new equipment.
Ready to upgrade? Please complete the details below for a fast, accurate valuation. We will base your part exchange against the item you are currently viewing on the site.
Epos K2 Loudspeakers
Price Match Request
Seen the Epos K2 Loudspeakers cheaper elsewhere? Let us know and we'll aim to match or beat it.
