ART Deco 10 Signature Loudspeakers
Condition Report
Score: 4 / 5 Excellent
Extremely clean. Shows only minimal, subtle signs of use.
- Finish : Lexus Pearlescent Red
- Full Flagship Signature Model with upgrades to crossover and internal wiring.
- Factory Matched Serial Number Pair on : 28026.
- ✓ Speaker Grilles
The ART Loudspeakers Deco 10 Signature is a high-end, 2-way bass-reflex floorstanding/stand-integrated loudspeaker from Scottish manufacturer ART (Acoustic Reproduction Technology). Engineered around a heavily braced cabinet built via ART's signature "DECOLAM" lamination process, the enclosure uses machined, cross-laminated layers to eliminate panel resonance and cabinet coloration. The cabinet is supported by a integrated stand architecture and finished in custom automotive-grade paint.
In this upgraded Signature Level (Level 2) specification, the Deco 10 features premium audio components throughout. High frequencies are handled by a 27 mm SEAS Crescendo soft-dome tweeter, paired with a 260 mm (10-inch) treated paper cone bass/midrange driver featuring a 50 mm voice coil. The hardwired Level 2 crossover utilizes 2nd/3rd order alignments constructed with Jensen copper foil capacitors and inductors, internal Kondo KSL-SPC copper wiring, and WBT Platinum Signature binding posts. Offering 90.5 dB sensitivity and a tube-friendly 8-ohm load (never dropping below 6.5 ohms), it excels when driven by low-power single-ended triode (SET) or valve amplifiers.
KEY FEATURES & PROPRIETARY TECHNOLOGIES
- DECOLAM Anti-Resonance Cabinet Construction: Machined and cross-laminated panel structure that eliminates internal standing waves and cabinet wall flexing.
- Signature Level (Level 2) Component Specification: Upgraded with a 27 mm SEAS Crescendo tweeter, Jensen copper foil inductors/capacitors, and Kondo KSL-SPC internal wiring.
- 260 mm Treated Paper Bass/Mid Transducer: Large 10-inch paper cone with a 50 mm voice coil delivers deep low-frequency extension down to 23 Hz.
- Tube-Friendly Efficiency & Impedance: High 90.5 dB sensitivity with an 8-ohm nominal load (minimum 6.5 ohms) enables easy pairing with low-power valve and SET amplifiers.
- WBT Platinum Signature Terminals: High-purity WBT binding posts ensure optimal signal transmission and long-term durability.
- Automotive Paint Finishes: Finished in high-gloss or pearlescent automotive-grade paint options over the DECOLAM cabinet shell.
SPECIFICATIONS
| Specification | Detail |
|---|---|
| Product Category | 2-Way Bass Reflex Floorstanding Loudspeaker with Integral Stand |
| Brand / Manufacturer | ART Loudspeakers (Acoustic Reproduction Technology) |
| Model Designation | Deco 10 Signature (Level 2 Specification) |
| Cabinet Construction | DECOLAM Anti-Resonator Laminated Shell with Integrated Stand Architecture |
| High-Frequency Driver (Level 2) | 27 mm SEAS Crescendo Soft-Dome Tweeter |
| Bass / Midrange Driver | 1x 260 mm (10.2") Treated Paper Cone Driver (50 mm Voice Coil) |
| Crossover Components (Level 2) | 2nd/3rd Order Alignment with Jensen Copper Foil Inductors & Capacitors |
| Internal Cabling (Level 2) | Kondo KSL-SPC High-Purity Copper Wiring |
| Binding Posts | WBT Platinum Signature Terminals |
| Frequency Response | 23 Hz – 25,000 Hz (±2 dB) |
| Sensitivity | 90.5 dB / 1 W @ 1 m |
| Nominal Impedance | 8 Ω (Minimum 6.5 Ω) |
| Recommended Amplifier Power | Minimum 8 Watts |
| Finish Options | Custom Automotive & Pearlescent Colors |
| Dimensions (H x W x D) | 1060 x 325 x 325 mm (41.7" x 12.8" x 12.8" with integrated stand) |
| Packed Weight | 50.0 kg (110.0 lbs) per speaker |

